Specifications

7-71
Parameter Menus
Set Lengths for Code 11
Parameter # L1 = 1Ch, L2 = 1Dh
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Lengths for Code 11 can be set
for any length, one or two discrete lengths, or lengths within a specific range.
One Discrete Length - Select this option to decode only those codes containing a selected
length. For example, select Code 11 One Discrete Length, then scan 1, 4, to limit the
decoding to only Code 11 symbols containing 14 characters. Numeric bar codes begin on
page 7-143. To change the selection or cancel an incorrect entry, scan the Cancel bar code
on page 7-145.
Code 11 - One Discrete Length
Two Discrete Lengths - Select this option to decode only those codes containing two
selected lengths. For example, select Code 11 Two Discrete Lengths, then scan 0, 2,
1, 4, to limit the decoding to only Code 11 symbols containing 2 or 14 characters.
Numeric bar codes begin on page 7-143. To change the selection or cancel an incorrect
entry, scan the Cancel bar code on page 7-145.
Code 11 - Two Discrete Lengths