User manual

TH
230/TH230+
_____________________________________________________________________
_____________________________________________________________________
21
Energy-saving Mode
(TH230+ always, TH230 as of firmware 1.06)
If the TH230 is switched on but without a print job it stays in standby
mode, which means, that all functions of the printer are powered with
low voltage to be ready for operation.
In order to save more energy the printer changes into idle mode after an
adjustable waiting time. Under idle condition the least amount of energy
will be consumed. The mode will be indicated by flashing of the POWER
LED.
If the printer receives print data it will change into full powered printing
mode. Having done the print job the TH230 will turn to standby mode
and then to idle mode again.
In the delivery status of the printer the function “idle mode” will be
deactivated. The function and the according waiting time must be
enabled in the configuration menu or via software.