User manual

TH
230/TH230+
_____________________________________________________________________
_____________________________________________________________________
15
Af
ter determination of the distance mark:
- Tighten the locking screw
- Insert the paper roll
- Close the printer cover and lock it
Connecting the TH230
The connectors are located at the bottom side of the printer.
The picture shows the USB/CASH DRAW/DC24V variant.
Connect the hosiden plug of the low voltage cable to the low voltage
socket of the printer (DC24V). Make sure that the plug is connected
tightly. Check this by slightly pulling at the low voltage cable.
Connect the plug from the USB data cable to the USB socket at the
printer and guide the cable through the strain relief.
Connect the cable from the cash drawer to the CASH DRAW socket of
the printer. Inserting the plug will automatically lock it.
The current drain of the cash drawer from the printer must not exceed
1A@24V.
DC2
4V
CA
SH
DRAW
US
B
Str
ain relief