User manual

TH
230/TH230+
_____________________________________________________________________
_____________________________________________________________________
14
Pa
per Near End Sensor Adjustment
The paper end premonition is a control function. It allows to adjust a
predefined amount of remaining paper on the roll.
The paper end premonition depends on the core diameter and the
paper thickness of the paper roll in use.
You can adjust the remaining amount of paper yourself follow the steps
below:
- Open the printer cover.
- Remove the paper roll.
- Loosen the locking screw at the inner wall of the printer for instance
with the aid of a coin (do not remove the screw).
Move the adjusting grip to determine the remaining paper amount.
A lower distance mark (adjustment grip downwards) will cause a lower
amount of remaining paper and vice versa:
The scale reaches from 0.5mm to 12.5mm.
Ad
justing grip
Loc
king screw
Se
nsor