User manual

TH 230
_____________________________________________________________________
_____________________________________________________________________
15
After determining the distance mark:
- Tighten the locking screw
- Insert the paper roll
- Close the printer cover and lock it
Connecting the TH230
The connectors are located at the bottom side of the printer.
The picture shows the USB/CASH DRAW/DC24V variant.
Connect the hosiden plug of the low voltage cable to the low voltage
socket of the printer (DC24V). Make sure that the plug is connected
tightly. Check this by slightly pulling at the low voltage cable.
Connect the plug from the USB data cable to the USB socket at the
printer and guide the cable through the strain relief.
Connect the cable from the cash drawer to the CASH DRAW socket of
the printer. Inserting the plug will automatically lock it.
DC24V
CASH DRAW
USB
Strain relief