User guide

TH210-3 for MF

_____________________________________________________________________

_________________________________________________________

Code (Hexadecimal) Command

1D 03 n Real Time Request to Printer (GS

Sequence)

1D 04 n Real Time Status Transmission (GS

Sequence)

1D 05 Real Time Printer Status Transmission

1D 06 Get Firmware CRC

1D 07 Return Micro Processor CRC

1D 21 n Select Character Size

1D 22 n Select Memory Type (SRAM/Flash) Where

to Save Logos or User-Defined Fonts

1D 22 55 n1 n2 Flash Memory User Sectors Allocation

1D 23 n Select the Current Logo

1D 24 nL nH Set Absolute Vertical Print Position in

Page Mode

1D 2A n1 n2 d1...dn Define Downloaded Bit Image

1D 2F m Print Downloaded Bit Image

1D 3A Select or Cancel Macro Definition

1D 40 n Erase User Flash Sector

1D 42 n Select or Cancel White/Black Reverse

Print Mode

1D 48 n Select Printing Position of HRI Characters

1D 49 n Transmit Printer ID

1D 4C nL nH Set Left Margin

1D 50 x y Set Horizontal and Vertical Minimum

Motion Units

1D 56 m Select Cut Mode and Cut Paper

1D 56 m n Select Cut Mode and Cut Paper

1D 57 nL nH Set Printing Area Width

1D 5C nL nH Set Relative Vertical Print Position in Page

Mode

1D 5E r t m Execute Macro

1D 61 n Select or Cancel Unsolicited Status Mode

(USM)