User guide

TH210-3 for MF
_____________________________________________________________________
_________________________________________________________
11
LED
The green LED shows the printer status by shining or flashing. A
continuous green (non-flashing) LED represents an “ON”, no-fault
condition.
Status LED
Paper Is Low Flashes Slowly
Paper Is Out Flashes Quickly
Knife Jam Flashes Quickly then Slowly
Tone
A single beep indicates the printer has successfully completed its
startup routine (after having been reset or the power supply turned on).
If the printer beeps twice, a problem may be indicated.
For more information
about
See these “sections”
Paper Feed Button “Testing the Printer”
“Configuring the Printer”
Reset Button “Troubleshooting the Printer”
“Testing the Printer”
“Configuring the Printer”
LED “Troubleshooting the Printer”
Tone “Troubleshooting the Printer”