User guide

TH210-3 for MF

_____________________________________________________________________

_________________________________________________________

 Do not allow the printer to start printing when there is no

recording paper installed, otherwise the print head and platen

roller will be damaged.

 To ensure quality print and normal lifetime, use recommended

or good quality paper.

 Shut down the printer when connecting or disconnecting

interfaces connectors to avoid damage to the control board.

 Set the print darkness to a lower grade as long as the print

quality is acceptable. This will help to keep the print head

durable.

 The printer should only be disassembled or repaired by a

technician, who is certified by Wincor Nixdorf. At any work on

the device and plugging/unplugging cables disconnect the

device from the power supply completely. Switch off the device

and pull the mains plug.

 Operate the printer only with power supplies and cables

approved by Wincor Nixdorf

 Keep this manual safe and at hand for ready reference.