User guide

TH200E User Guide
19
ESC M Select character font
ESC R Select an international character set
ESC S Select standard mode
ESC T Select print direction in page mode
ESCV Turn 90º clockwise rotation mode on/off
ESC W Set printing area in page mode
ESC \ Set relative print position
ESC a Select justification
ESCc3 Select paper sensor(s) to output paper-end signals
ESCc4 Select paper sensor(s) to stop printing
ESCc5 Enable/disable panel buttons
ESC d Print and feed n lines
ESC p General pulse
ESC t Select character code table
ESC { Turn upside-down printing mode on/off
FS g 1 Write to NV user memory
FS g 2 Read from NV user memory
FS p Print NV bit image
FS q Define NV bit image
Gs FF Feed next mark to the printing position
GS ! Select character size
GS$ Set absolute vertical print position in page mode
GS (A Execute test print
GS* Define downloaded bit image
GS/ Print downloaded bit image
GS: Start/end macro definition
GS B Turn white/black reverse printing mode on/off
GS H Select printing position of HRI characters
GS I Transmit printer ID
GS L Set left margin