User guide

TH200E User Guide

Control Sequences

The control sequences of the printer controller are based on the ECS/POS

standard.

For details, please refer to the programming manual.

Code Function

HT Horizontal tab

LF Print and line feed

FF Print and return to standard mode (in page mode)

CR Print and carriage return

CAN Cancel print data in page mode

DLE EOT Real-time status transmission

DLE ENQ Real-time request to printer

DLE DC4 Generate pulse at real-time

ESC FF Print data in page mode

ESC SP Set right-side character spacing

ESC ! Select print mode(s)

ESC $ Set absolute print position

ESC % Select/cancel user-defined character set

ESC & Define user-defined characters

ESC* Select bit-image mode

ESC-n Turn underline mode on/off

ESC 2 Select default line spacing

ESC 3 Set line spacing

ESC = Select peripheral device

ESC ? Cancel user-defined characters

ESC @ Initialize printer

ESC D Set horizontal tab positions

ESC E Turn emphasized mode on/off

ESC G Turn double-strike mode on/off

ESC J Print and feed paper

ESC L Select page mode