User guide

TH200E User Guide
11
Configuring The Printer
The printer has already been pre-configured. However, you can re-configure the
printer using the FEED BUTTON MENU. The MENU can also display current
configuration settings and perform self-tests.
To ac cess th e m enu, swi tc h o ff th e pri nter. Press t he FEED but t on down f or at least
2 seconds while turning on the power switch. The menu page will be printed:
Print Self Test – Show important configuration settings for the printer and do a
simple printing test
Configuration – Change parameter settings for the printer. (see next
page for
details)
Cutter Test – The printer performs 4 halfcuts and a fullcut
Sensor Test – ERR
LED will indicate ON/OFF according to the state of the
sensors
Print Statistics – Show the total number of paper cuts and linefeeds performed
To choose a submenu, PRESS THE FEED BUTTON X-TIMES according to the
selection digit in the main menu, then press and hold the FEED button for at least
one second to validate the choice.