User guide

CERTO 415/417
_____________________________________________________________________
_________________________________________________________
60
Important:
The sensor does only react on movement. A person
standing in front of the terminal without moving will not be detected. It is
thus not possible to tell by means of the output signal of the sensor, if a
person is present in front of the terminal or not.
The sensor can be protected from vandalism by being implemented
directly behind plastic covers. It can either be implemented behind an
opening of at least 35 x 45 mm in metallic cabinet, whereas the opening
in turn can be covered by a plastic element.
Starting from the sensor surface the sensitivity area is ball-shaped.
Technical Data:
Supply voltage: 24V DC +- 10%
Current consumption: ca. 50mA
Sensitivity distance: pre-adjusted to ca. 1m
Camera
Features:
Low cost and high quality
VGA 640x480 @ 30 frame rate per second
USB Interface with Plug and Play
Lens focus from 3 cm to infinity
Full screen 640 x 480 display
High quality lens for sharp pictures
High-quality still pictures and motion video capturing
Specification:
Sensor: CMOS 120K pixels (image up to 640x480)
Video format: 24-Bit True Color
USB interface: compliant to USB 2.0 and 1.1
Image res: 640x480, 352x288, 320x240, 176x144, 160x120
Video resolutions: 640x480, 352x288, 320x240, 176x144, 160x120
VGA 640x480 @ 30 frame rate per second
Adjustable focus: 3 CM to infinity
Automatic white balance