User guide

CERTO 415/417
_____________________________________________________________________
_________________________________________________________
50
Important notes
The modular POS system BEETLE /M-II conforms to the current safety
standards for data processing equipment.
If this device is taken from a cold environment into the operating room,
moisture condensation may form. The device must be absolutely dry
before being put into service; an acclimatization period of at least two
hours must therefore be observed.
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
When setting up the device, ensure that the power socket on the
device and the grounded-contact power socket are easily accessible.
To disconnect the device from the supply voltage completely, switch
off the device und disconnect the power plug.
Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
In order to ensure that the device is well ventilated and to prevent
overheating, do not obstruct the ventilation slots on your device.
Never plug in or unplug data communication lines during
thunderstorms.
Protect devices from vibrations, dust, moisture and heat.
Always dispose of used parts in an environmentally safe manner.
The lithium battery must be replaced by the end user only by identical
batteries or types recommended by Wincor Nixdorf International GmbH.
The lithium battery must be disposed of in accordance with local
regulations for special waste.