User guide

CERTO 415/417
_____________________________________________________________________
_________________________________________________________
40
Cleaning
The DIP reader ID24 is cleaned with a cleaning card.
Check that no dirt remains in the card insertion slot. (If necessary, clean
the card insertion slot with a brush.)
You can clean the read head when the device is switched on or off.
Cleaning interval: every 20,000 transactions
Cleaning material: Wincor Nixdorf ELIX wet cleaning card
Order number:01750016388
Cleaning process
• Remove the cleaning card from its packaging.
The cleaning card can only be used for a brief period as it is a pre-
saturated cleaning card which dries out after removal from its
packaging.
• Insert the cleaning card into the card insertion slot like a regular ID
card.
• Pull the cleaning card from the slot.
• Repeat this a few times.
• Dispose of the cleaning card.