Technical data

Receipt Printer TP07c
01750105949 C CERTO 415/417 Kiosk System Operating Manual 45
Cut off the remaining paper at the paper support and pull it out.
Check if the paper roll is inserted correctly or a paper roll without black
mark is inserted.
Reinsert the paper (see section "Inserting the paper roll").
Cutter error
Check whether the cutter is in home position. If it is not, use the thumb
wheel as long as you can see the auburn plastic part on top of the cutter
(see above).
Unplug the power plug and plug it again. This should initialize the printer.
If this does not help, please contact the Technical Service.
Error thermal print temperature, high voltage/low voltage
Please contact the Technical Services