Technical data

Receipt Printer TP07c
40 CERTO 415/417 Kiosk System Operating Manual 0175105949 C
Take the front edge of the
paper over the upper axle and
feed it into the paper support
(see arrow).
Keep pushing the paper into
the paper support until it is
retracted automatically, the
paper is cut off and the
printed receipt is output via
the presenter.
.
See also the sticker on the
printer.
Remove the receipt that was cut off before.
Removing the paper roll
Cut off the paper at the paper support. Lift the paper roll out of the printer
with the paper roll holder upwards. Use the LINE FEED button to remove
the remaining paper.