User guide

Mounting the spacer in the paper compartment of ND77
Spacer
If you want your ND77 to print on paper rolls with a roll width of 57,5 mm
(± 0,5 mm) you have to insert a spacer. Therefore, first press the release
button and lift up the housing cover. You now have access to the paper
compartment.
Please note that the deflection roller (see arrow) is tapering in your ND77
from right to left. Only then it is possible to insert the spacer. Otherwise
the complete paper compartment has to be exchanged ! In this case plea-
se contact your local WN branch office or technical service.
First bend the spacer as shown in the picture below and guide the lower
catch underneath the deflection roller.
Appendix Spacer
GB - 55