User guide

Printing with the ND77
Printing w ith the ND7 7
The ND77 offers you three different possibilities to print on receipts, jour-
nals and documents:
the software stamp printing
the logo printing
graphics printing
You can use the logo or graphics printing on all three stations (receipt,
journal, document), whereas software stamp printing is designed for the
receipt station only.
Software Stamp Printing
If you want to print text or graphics frequently or permanentely on a receipt
e.g. your company name or trade-mark as header, we recommend to use
software stamp printing.
Example: You design your trade-mark by means of a standard graphics
software program. In doing so please make sure to create those (bitmap)
files as black and white files and to save them later accordingly.
The maximum size of a stamp you can print with your ND77 is an area of
25 856 dots. The maximum width (W) is 180 pixel (= 61.2 mm) with a pa-
per roll width of 69.5 mm. The height (H) of the stamp is variable, how-
ever, please mind that W x H ≤ 25 856. If you use paper rolls with a width
of 57.5 mm the maximum stamp width is 144 pixel (= 49 mm).
Having created your bitmap stamp file (black and white!) you then should
preferably save it as a black and white file in the same directory in which
you already stored the special load software (Flash-ROM Loader Utility)
for the stamp file.
With this loader utility you can load your file into the Flash EPROM of the
ND77. Thus your software stamp remains permanently stored and will not
get lost after the printer has been switched off.
Operation of the ND77 Printing with the ND77
GB - 39