User guide

Changing the journal roll
When you see a red stripe on the journal paper or when the paper end
LED “J” lights up, it is time to insert a new journal roll. Change the journal
roll as follows:
Removing the journal paper
When the paper end LED “J” on the control panel lights up, there are only
a few centimetres of journal paper left in the paper compartment. Lift up
the housing cover by pressing the release button.
Never forcefully pull out the journal paper when the print mechanism is
closed. Doing so will damage the transport rolls.
Tear through the journal paper and remove the journal paper from the
take-up spool. Remove the empty paper roll from the journal compartment.
Inserting the journal paper
Press the release button and lift up the housing cover.
Make sure that the paper on the new paper roll is evenly cut.
Press the button to the left of the receipt compartment (see arrow) and lift
up the printing mechanism.
Operation of the ND77 Changing the receipt and journal paper
GB - 23