User guide

Removing remaining receipt paper
Press the release button (see arrow) and lift up the housing cover to gain
access to the paper roll. You can remove the remaining paper by pressing
the line feed button on the control panel.
Never forcefully pull out the paper caught in the print mechanism. Doing
so will damage the transport rolls.
Take out the empty paper roll. If the end of the receipt roll is glued to the
paper roll, cut the paper from the roll.
Inserting the receipt roll
Press the release button and lift up the housing cover.
Make sure that the paper
on the new paper roll is
cut or torn evenly.
Changing the receipt and journal paper Operation of the ND77
GB - 20