User guide

After processing, the document will be ejected. The yellow LED flashes
twice. Now you can remove the document.
If the document sensors recognize a document end during document
processing, although print data still located in the print controller, this will
lead to a print stop (only if print stop is enabled). The document will be
ejected. When the print stop is enabled the printer will stop printing when
the document sensors recognize the end of a document. This occurs even
though print data remains in the print controller. To continue, or complete
printing, take out the document and insert a second document when the
yellow LED flashes. Changing the receipt and journal paper
Changing the receipt and journal paper
This section provides a detailed description of how to change the receipt
and journal paper rolls.
Changing the receipt roll
When a red stripe appears on the printed receipt, or the “paper end” LED
lights up on the control panel, a new receipt roll should be inserted. Chan-
ge the receipt roll as follows:
Operation of the ND77 Changing the receipt and journal paper
GB - 19