User guide

Operation of the ND77 POS printer
The ND77 POS printer has 9dot matrix printing mechanism serving
the three printing stations for receipt, journal and documents. Character
resolution is 9 x 9 dot matrix or 7 x 9 dot matrix, depending on the
character types you select from your application software.
The ND77 provides you with the possibility of controlling the line feed of
the receipt and journal paper via two buttons on the operator control panel.
For reasons of safety, the printing and cutting devices are shut down as
soon as the printer cover is opened.
The ND77 is supplied with a Flash EPROM to load in firmware updates
without opening the printer.
An individual company logo can be created by means of a block print
which is produced in graphic print quality. The logo is loaded into the
printer memory through your application software. Your ND77 can print
logos that were created up to a size of 25 856 dots.
An individual stamp (software) can be stored in the Flash EPROM of the
ND77 permanently. It still remains after switching off the printer.
Additional printer features are efficient printing and simple operation.
All consumables for the printer, such as receipt and journal paper or
ribbon cassettes can be ordered from WN branch office.
For the sake of the environment, always dispose of used materials
properly (see chapter on recycling).
GB - 17