User guide

With the cover open, this button is always enabled even if it is locked by
the command ESC c5.
Journal feed button
Press the journal feed button once to advance journal paper one line. The
line spacing corresponds to the default value of 1,6". You can also hold
down the button to feed journal paper continuously.
With the cover open, this button is always enabled even if it is locked by
the command ESC c5.
LEDs
Green LED “POWER” The power light is on when the printer power
is on.
Red LED “ERROR” This LED is on when the printer cover is open.
The LED is blinking if an error occurs (see page 49).
In normal state the LED is off.
Yellow LED “DOCUMENT” This LED blinks while the printer is waiting for
document paper. It lights permanently when a
document is inside the printer and blinks twice
when the document paper is being ejected.
The LED is off when the document station is
not selected.
Red LEDs “PAPER END” The LEDs are on if either the receipt station “R”
or the journal station “J” recognized a paper
end or if paper rolls are not installed.
The LEDs are off if paper is available on the
respective print stations.
Installation The operator control panel
GB - 15