User guide

Connecting peripherals
Cash drawer
Connecting peripherals
The ND77 has a RJ12 jack for connecting a cash drawer. To prevent mal-
functions, make sure that the connector is plugged firmly into the socket.
Power is supplied to the cash drawer via this socket.
When connecting cash drawers, the construction level 1 (Release 4) for
the KA16 or KA17 is absolutely necessary! The construction level is noted
on a label on the bottom of the cash drawer.
Customer display
The customer display is connected to the serial interface. The interface
connection on the ND77 is a 9pin D-sub connector.
To prevent possible malfunctions, make sure that the connector for the
customer display is plugged firmly into the socket. The power is supplied
via this jack.
Installation Connecting peripherals
GB - 13