Technical data

Basic Operation
16 BEETLE /Fusion – Operating Manual 01750166736 G
· Turn on the unit by pressing the power button (1) at the bottom right of the
screen unit (1). The LED on / off lights should be visible (2)
· Once the application is started, the system is ready.
Should the system not running up, turn off the unit again. To do this, press the
power button about 5 seconds.
Check all connections on a fixed and correct position and turn the power back
on.
If the problem persists, turn the unit off again and pull the plug. Inform the
Technical Support, Wincor Nixdorf.
2 LED On/Off
1 Power ON/OFF