BEETLE /Fusion Operating Manual
The reproduction, transmission or use of this document or its contents is not permitted without express authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability; technical modifications possible.
BEETLE /Fusion Operating Manual Edition Jul 2012
Contents Contents Manufacturer’s Certification ......................................................1 Tested Safety ...........................................................................1 FCC-Class A Declaration .........................................................2 BSMI (EMC for Taiwan) ...........................................................2 Technical & Regulatory Information on Wireless....................3 Wireless Interoperability .........................................................
Contents Turning on BEETLE /Fusion ....................................................15 Turning off BEETLE /Fusion...................................................17 Brightness adjustment............................................................17 Touch screen ............................................................................18 How to Operate ......................................................................18 Cleaning Instructions........................................................
Manufacturer’s Certification Manufacturer’s Certification The device complies with the requirements of the EEC directive 2004/108/EC with regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive”. Tested Safety The BEETLE /Fusion has been provided with the symbol for “Tested Safety”. In addition, the device has received the UL symbol and cUL symbol.
Manufacturer’s Certification FCC-Class A Declaration This equipment has been tested and found to comply with the limits for a ClassA digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Manufacturer’s Certification Technical & Regulatory Information on Wireless Wireless Interoperability The WLAN adapter integrated in the BEETLE /Fusion is designed to be interoperable with any wireless LAN product that is based on direct sequence spread spectrum (DSSS) and to comply with the following standards: · IEEE Std 802.11b Standard on 2.4 GHz Wireless LAN · IEEE Std 802.11g Standard on 2.4 GHz Wireless LAN · IEEE Std 802.11a Standard on 5 GHz Wireless LAN · IEEE Std 802.
Manufacturer’s Certification If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or environment (a hospital, for example), you are encouraged to ask for authorization to use the adapter before you turn it on. Regulatory Information The WLAN adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product.
Manufacturer’s Certification Europe-EU Declaration of Conformity This equipment complies with the essential requirements of the European Union directive R&TTE 1999/5/EC. Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne R&TTE 1999/5/CE. Die Geräte erfüllen die grundlegenden Anforderungen der R&TTE-Richtlinie 1999/5/EG. Questa apparecchiatura è conforme ai requisiti essenziali della Direttiva Europea R&TTE 1999/5/CE.
Manufacturer’s Certification Utrustningen uppfyller kraven för EU-direktivet 1999/5/EC om ansluten teleutrustning och ömsesidigt erkännande av utrustningens överensstämmelse (R&TTE). Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC) vaatimuksia. This product is intended to be used in all countries of the European Economic Area when operating in IEEE 802.11b and/or IEEE 802.11g mode at 2.4 GHz (see France below). When operating in the IEEE 802.
Introduction Introduction This operating manual provides all the information required for the operation of Fusion system. Having studied the operating manual, you will be able to properly operate the system. Symbols used in this guide - Text following this mark represents an item in a list. ““ Text in quotation marks contains references to other chapters or sections in this document. ● Paragraphs following this symbol are actions to be performed in the specific order.
Introduction Important Safety Precautions ! WARNING Please read the following notes carefully before doing any work on the device. This device complies with the relevant safety regulations for information processing equipment. 8 - Note the warning and information labels on the device. - The device is equipped with a safety-tested power cable, which must be connected only to a grounded outlet.
Introduction - In case of an emergency (e.g. damaged cabinets, control or power cables, liquids or foreign objects in the device), switch off the device immediately and inform the customer service responsible for you. - During the thunderstorm, data transmission lines must not be connected or disconnected. - Only use accessories and extension components that have been approved by us.
Overview Overview The BEETLE /Fusion is a family of POS terminal that is configurable for wall mount or desktop application. It is designed for indoor installation. Components The configuration of the Fusion may comprise of the following components: - Processor options: Category A Category B Category C o Celeron M 1.0GHz o Celeron Dual Core, T3100 1.9GHz o Atom D425 1.8GHz o Celeron M 1.5GHz - Min. 512MB RAM (up to 2GB RAM) - Mass storage options: § 160GB 2.5” hard disk (min.
Overview - 01750166736G Mounting options: § wall mount version § desktop version BEETLE /Fusion – Operating Manual 11
Overview Front view – wall mount version Camera & microphone Display Stereo speakers LED ON/OFF Barcode reader Power ON/OFF Proximity sensor Brightness adjustment 12 BEETLE /Fusion – Operating Manual 01750166736 G
Overview Front view – desktop version Camera & microphone Display Stereo speakers LED ON/OFF Brightness adjustment Barcode reader Proximity sensor Power ON/OFF Desktop stand 01750166736G BEETLE /Fusion – Operating Manual 13
Overview Rear View Access cover for customer display interface Access cover for HDD, CF & miniPCle Access cover for memory module 100mm VESA mount holes Cable Cover Front bezel 14 Back cover assembly consisting of a plastic exterior cover with an inner metal shield BEETLE /Fusion – Operating Manual 01750166736 G
Basic Operation Turning on BEETLE /Fusion To put the system in operation, observe the following: · Remove the cable cover. · Inset the IEC connector of the cable into power supply. · Plug the 24V plug into the jack on the BEETLE / FUSION (see arrow below). · Put the safety plug in the socket of the building installation.
Basic Operation · Turn on the unit by pressing the power button (1) at the bottom right of the screen unit (1). The LED on / off lights should be visible (2) 2 LED On/Off 1 Power ON/OFF · Once the application is started, the system is ready. Should the system not running up, turn off the unit again. To do this, press the power button about 5 seconds. Check all connections on a fixed and correct position and turn the power back on. If the problem persists, turn the unit off again and pull the plug.
Basic Operation Turning off BEETLE /Fusion To turn off the system, shut down the operating system. Press the power button for about 5 seconds and observe the LED light to be off. If possible, disconnect the power cord to completely disconnect the unit from the mains. Brightness adjustment · The key for this setting are at the lower right side of the display unit (see figure below).
Touch Screen Touch screen How to Operate Touching the touch screen has the same effect as clicking the left mouse button. Depending on the selected touch screen option, the user experience with touch is different. For capacitive touch it responds to very light touch, and only touch using bare finger is possible. As for resistive touch it requires slightly harder touch to get a response, and touch with glove is possible.
Touch screen Cleaning Instructions Always turn off the system before cleaning! The glass surface of your Touch Screen should be cleaned with a mild, abrasive free, commercially available glass cleaning product. All pH neutral materials (pH 6 to 8) are good for cleaning. Cleaners with pH values 9 to 10 are not recommended. Cleaning with water and isopropyl alcohol is possible as well. Do not use solvents containing acetic acid. Use a soft, fine-meshed cloth to clean the surface.
Camera Camera Operation The digital camera with integrated digital microphone is located near the top edge of the BEETLE /Fusion. Picture or video can be taken under the control of the software application. The range of focus for the digital camera is from 60cm onward. ? NOTE Camera option is NOT available for BEETLE /Fusion 12.
Camera Barcode reader Hold the barcode in a landscape format underneath the barcode reader. The laser beam will start automatically. The laser beam must cover the whole width of the barcode. A successful reading of the barcode will be quit with a beep.
Camera Proximity Sensor With the proximity sensor persons as well as objects of comparable size, moving within the detection area of the sensor, are detected and are signalled to the application program via evaluation electronics. The application can react to this message e. g. by sending out acoustic signals or by changing the content on the monitor.
Appendix Appendix Technical Data for BEETLE /Fusion 12 Wall mount Desktop 296 mm 96 mm 320 mm 420 mm 265 mm 320 mm Weight of device 6.3 kg 9.0 kg Climatic category Operating Transport Storage IEC 721-3-3 class 3K3+ 5° to +40°C IEC 721-3-2 class 2K2 -25° to +60°C IEC 721-3-1 class 1K2 +5° to +40°C Rated Input voltage Cat A & B 24V DC (nominal) Cat C 24V DC (nominal) Rated Input current 7.5A 4.
Appendix Technical data for BEETLE /Fusion 15 Wall mount Desktop 336 mm 96 mm 370 mm 430 mm 265 mm 370 mm Weight of device 6.8 kg 9.5 kg Climatic category Operating Transport Storage IEC 721-3-3 class 3K3+ 5° to +40°C IEC 721-3-2 class 2K2 -25° to +60°C IEC 721-3-1 class 1K2 +5° to +40°C Rated Input voltage Cat A & B 24V DC (nominal) Cat C 24V DC (nominal) Rated Input current 5.0A / 7.5A 4.
Appendix Technical data for BEETLE /Fusion 19 Wall mount Desktop 342 mm 96 mm 476 mm 434 mm 265 mm 476 mm Weight of device 8.0 kg 10.7 kg Climatic category Operating Transport Storage IEC 721-3-3 class 3K3+ 5° to +40°C IEC 721-3-2 class 2K2 -25° to +60°C IEC 721-3-1 class 1K2 +5° to +40°C Rated Input voltage Cat B 24V DC (nominal) Rated Input current 7.
Appendix AC Power Adapter The AC power adapter used must be Wincor Nixdorf’s qualified and has to meet the following minimum requirements and industry standards: 26 Rated Input voltage 100 - 240 Vac Input Voltage range 90 to 264Vac Input Frequency range 47 to 63 Hz Rated Output voltage 24V ± 5%, Rated Output current 4.16A (mini if BEETLE /Fusion rating is 4.16A 5.0A (min) if BEETLE /Fusion rating is 5.0A 7.5A (min) if BEETLE /Fusion rating is 7.
Appendix Power Cord Selection If the power cord is not provided with the system, the user has to ensure that a certified power cord is used as required by the Safety Regulation of the country. Countries Safety Approvals USA UL Canada CSA Germany VDE Japan PSE Taiwan BSMI China CCC For other countries not mentioned in the above list, please check with the local authority.
Appendix System specification High-End Entry-Level Processors Celeron M 1.0GHz or Atom D425 1.8GHz or Celeron T3100 1.9GHz or Celeron M 1.5GHz Atom D525 1.8GHz Core 2 Duo P8400 2.26GHz Chipset Intel 910GMLE, ICH6M Intel Atom, ICH8M Intel GM45, ICH9M-E Memory Two memory slot, each support up to 1GB 400MHz DDR2 un-buffered SODIMM One memory slot, support up to 2GB 1067MHz DDR3 unbuffered SODIMM. One memory slot, support up to 4GB 1067MHz DDR3 un-buffered SODIMM.
Appendix Network On-board 10/100/1000 LAN (Ethernet) Optional Wireless LAN 802.
Appendix NVRAM 4K bits (optional) Mass storage 2.5” Hard disk, 160GB minimum 8GB, 16GB, 32GB & 64GB SSD (MLC type) Fusion 12 Primary Display Resolution Brightness Contrast ratio Touch screen option 12.1” SVGA 800 x 600 370 cd/m2 450 Fusion 15 Fusion 19 15” XGA 1024 x 768 250 cd/m2 300 18.5” WXGA 1366 x 768 250 cd/m2 1000 Capacitive or Resistive Camera option – integrated camera with microphone X P Infra-Red P .
Appendix I/O connection ports USB (RJ45) note1, 2 PS/2 COM2 COM3 COM1 VGA LAN Cashdrawer (RJ12) note2 COM5 (touch) note1 COM4 USB3 24V USB1 USB2 USB4 12V eSATA Audio 5/12V Output note1: Proprietary interfaces, for Wincor specific devices only. note2: Externally accessible port is optional.
Appendix Total Available Power of External I/O Ports The total power available for the external IO ports depends on the choice of AC power adapter used. Below is the Wincor Nixdorf’s approved AC power adapter for BEETLE /Fusion.
Appendix Rated Voltage (V) Max Current (A) Max Power (W) COM2&3 (combined) 12 1 12 5 1 5 COM4 12 1 12 5 0.5 2.5 Depends on the power adapter used. USB1 5 0.5 2.5 See above table for the USB2 5 0.5 2.5 applicable total USB3 (+24Vdc powered) 5 0.5 2.5 available power I/O Port Name Max Total Power consumption (W) 24 3 72 5 0.5 2.5 USB4 (+12Vdc powered) 12 3 36 USB5 (mini-PCIe) 5 0.5 2.5 5/12V Output 12 1.5 18 5 1.5 7.5 Other Notes: 1.
Appendix Approved Printer List The following are the approved printers that are allowed to be connected to the BEETLE /Fusion’s +24Vdc Powered USB port: Model Manufacturer 1 TH230 Wincor Nixdorf 2 TH320 Wincor Nixdorf 3 TH420 Wincor Nixdorf 4 ND210 Wincor Nixdorf 5 ND77 Wincor Nixdorf 6 TH200 series Wincor Nixdorf ! WARNING Connecting printer that are not in the above approved list to the +24Vdc Powered USB port may cause safety hazard and endanger the user and the nearby people.
Published by Wincor Nixdorf Pte Ltd 2, Kallang Sector Singapore 349277 Part No.
