User manual

The “OFF Timer” switches the CPU to sleep mode after a predefined pe-
riod of inactivity (5 - 15 - 60 minutes). You must not have a screen saver
active. In sleep mode, the microprocessor is stopped at intervals and then
clocked at full speed again, thus reducing power consumption.
In addition, the backlighting of the cashier display is activated and, if a mo-
nitor is connected, it is blanked.
You can set a deactivation time for the hard disk (OFF and 60 minutes).
If HD Timer is set to “60 Min”, the hard disk is switched to standby mode
after 60 minutes.
COM interfaces
BIOS also lets you specify whether or not the power supply to the serial in-
terfaces COM2* to COM4* (COM Supply ON) is to be disabled in sleep
mode (COM Supply OFF).
OFF Timer 60 Min
(8) Prev (6) Incr
(2) Next (4) Decr
HD Timer OFF
(8) Prev (6) Incr
(2) Next (4) Decr
COM Supply OFF
(8) Prev (6) Incr
(2) Next (4) Decr
BIOS setup
GB - 87