User manual

In the case of the 80486DX2 CPU, hard disk types 1-39
and User Type exist. Thus, in the figure above, the entry
“Type 46" must be replaced by ”User Type".
As the following diagram shows, you have three basic alternatives:
1. You can use the automatic configuration option offered in setup, in
which the parameters are automatically read from the hard disk and ente-
red.
2. You can enter a configuration manually using the parameters specified
in the documentation for IDE hard disks.
3. You can select a drive that corresponds to one of the types specified
(numbers 1 to 44 or, in the case of the 80486DX2 CPU, numbers 1 to 39
and User Type).
Cylinders ____
Enter 4 Chars
Heads __
Enter 2 Chars
(3) Edit Params
Sectors __
Enter 2 Chars
(2) (8)
(2) (8)
(2) (8)
(3)
(3)
(3)
BIOS setup
GB - 85