User manual

The following media can be assigned to a drive:
■ Floppy disk
■ BEETLE card as an option
■ Network
■ Hard disk
The logical drives are designated A:, B:, C: and D:.
If the system is to be started from a BEETLE card or floppy disk, they
must always be assigned drive A:. However, it is also possible to assign
drive B: to the BEETLE card or floppy disk if you want to use it purely as a
data carrier. The network is always assigned drive C: during startup. The
hard disk can be assigned to drive C: or D:. It is only bootable when confi-
gured as drive C:. Startup behavior
The BEETLE /20 POS system can be started from two drives. Please note
the following:
The system can only be started from drive A: or C:.
The storage medium must be bootable.
The following priorities apply:
BEETLE card or floppy disk (A:) High priority
Network (C:) Medium priority
Hard disk (C:) Low priority
If the BEETLE card or floppy disk is inserted, the POS system always
accesses this first.
Startup behavior
GB - 77