User manual

Care and Cleaning
Care of the BEETLE /20
Clean the surface of your BEETLE /20 regularly using a computer
cleaning set suitable for plastic surfaces. You can make enquiries at your
Wincor Nixdorf branch or ask your dealer.
Always make sure before you clean the system that it is
switched off, the power plug is disconnected, and that no
moisture gets inside it.
Cleaning the printer
Please follow the cleaning steps below. You thus can avoid errors and mal-
functions in printing.
You should clean your printer thoroughly each time you insert a new rib-
bon cassette and when the print quality gets worse.
■ For cleaning the inner housing of the one station or two stations
printer use a soft brush or a lint-free cloth.
■ Please note to clean the paper tear-off edge with a small vacuum cle-
aner from time to time.
Please mind the following cleaning steps to ensure a long life time of your
two stations printer.
GB - 58