User manual

Adding stamp ink

If the logo stamp becomes too light, you must add commercially available

ink. Follow these steps:

Lift up the paper com-

partment cover and re-

move the receipt roll.

Grasp the handle of the

stamp and pull it out

slowly and evenly up-

ward, being careful to

keep the stamp straight.

Pour 2 or 3 drops of ink

into the ink inlets on the

back of the stamp.

When reinserting the

stamp, make sure that

the print side is facing

upwards.

Reinsert the receipt roll

and close the paper

compartment cover.

Thedeviceisready

again for operation.

The new stamp ink requires several hours penetration time

before it provides a clear slogan stamp. For this reason, we

recommend that you add ink at business closing time.

Adding stamp ink Two-stations printer

GB - 54