User manual

Find the corresponding adjustment position number from the table below.
Adjustment position Distance A Rest length* (m) approx.
10mm0
2 2 mm 0 + 0.5
3 4 mm 1.2 ± 1.0
4 6 mm 3.0 ± 1.0
5 8 mm 4.5 ± 1.0
*The remaining paper length indicated refers to a core diameter of the
paper roll of 17.5 mm (inside) 21.5 mm (outside) and a paper thickness of
0.08 mm.
Locate the adjusting screws shown in the illustration below.
factory
setting
1
3
2
5
4
3
2
1
5
4
3
2
1
Adjusting the paper end detectors Two-stations printer
GB - 48