User manual

One-station printer with winder
The one-station printer used with the BEETLE /20 is a 9-pin dot-matrix
printer with a single print station. While printing the receipt, the journal
print ill be created by the press copy. It then is threaded on a spool.
Changing the print head and the ribbon cassette is the same as described
in the section “One station printer”. To change the receipt and journal roll
proceed as follows.
Changing the receipt and journal roll
You will need special receipt and journal paper. For the paper specificati-
on see the appendix “Technical data”. When you see a red strip on the pa-
per roll, you know that you have reached the end of the roll.
Take hold of the paper
compartment’s
catch , and flip it
upward in order to
gain access to the pa-
per compartment.
Do not remove the paper against the rotational direction of
paper.
➊
GB - 38