User manual

Changing the receipt rollOne-station printer
Place the new paper
roll in the paper com-
partment, ensuring
that the roll of paper
➊ rotates in the cor-
rect direction and that
it is aligned correctly.
Lead the paper by
hand to the drive shaft.
Hold down the paper
advance key ➋ ,let
the paper go of and
wait until the paper
comes out of the
guide ➌.
Remove surplus paper using the tear-off edge, and close the paper com-
partment cover again. Your terminal is now ready for operation.
Please remove paper residues at the tear-off edge with a
small vacuum cleaner from time to time.
Make sure not to print without loaded receipt paper.
Bedienfeld
➋
➌
➊
One-station printer Changing the receipt roll
GB - 33