User manual

Scanner
Depending on the existing configuration, scanners are connected to the
COM2*, COM3* or COM4* serial interface. This is a 9-pin D-sub socket.
To prevent malfunctioning, make sure that the plug is well secured to the
socket. The scanner can be supplied with power via this socket.
Note the maximum current intensity permitted at the COM
interfaces (see “Technical data”).
Customer display
An alphanumeric customer display is preferably connected to COM4*.
This is a 9-pin D-sub socket. To prevent malfunctioning, make sure that
the plug is well secured to the socket. Power is supplied via this socket.
Connecting peripherals
GB - 19