User manual
Connecting peripherals
Connecting peripherals
The illustration shows part of the rear panel of the BEETLE /20, with the
position of the connecting sockets and connectors. A SVGA/VGA graphics
adapter is necessary to connect a monitor. If you install a network adapter,
you can also connect the system to a network.
Some of the peripherals mentioned in the following pages are availabe as
options. There are separate manuals for all the equipment that can be con-
nected, so if you want more detailed information, please refer to the rele-
vant manual.
Before connecting peripherals, you must ensure that all po-
wer and equipment switches are in the off position. Otherwi-
se, the central processing unit (CPU) of the POS system
may malfunction.
If the peripherals are supplied with power through the sy-
stem (+5V/+12V), you must ensure that the maximum per-
missible current for the entire configuration is not exceeded.
DC24
Mains supply
Socket
KYBD
CASHDR COM4* COM3* COM2* COM1
LAN
AT-SLOT
AT-SLOT
COM7
COM8
VGA/LAN/ASYN
LPT1
Connecting peripherals
GB - 17