User manual

Connecting to the mains power supply
Connecting to the mains powersupply
All devices that belong to the BEETLE /20 and have a separate power cab-
le must be connected to the same circuit. The terminal automatically identi-
fies the local mains voltage when it is switched on, and there is therefore
no need for you to make any adjustments in or on the device.
Ensure that the device is switched off (the on/off switch must be out).
To access the switch, you may have to push the cover aside.
Ensure that all data cables on the system unit and the peripherals are
properly connected.
Plug all the power cables of the peripherals and the BEETLE /20 into
the grounded-contact utility power sockets.
You can now switch the BEETLE /20 on using the switch at the front of the
housing.
Cover (adjustable)
On/Off switch
Connecting to the mains power supply
GB - 14