User manual

Error messages via blink codes (two station printer)
After having lift up the
paper compartment co-
ver, you will see the
marked LED left to the
printer. However, you
can see the blinking of
the LED from the out-
side too.
LED “ERROR”
Blinking of the red LED “ERROR” indicates that an error has occured. The
respective blink codes are shown graphically in the following. The blinking
cycle is about 2 sec.
Recoverable errors
Type of error Light flashing pattern (2 sec.) Source of error
Print head overheated
error
The print head ist
overheated. The following
error recovers automatically
by cooling the print head.
Automatic cutter error
Error can be recovered by
DLE ENQ 1 or DLE ENQ 2
control command.
Home position detection
error *
Carriage detection error*
* see the section cleaning of BEETLE/20 two-stations printer
LED Error
Paper feed button
for journal (top) and
receipt (bottom)
LED Paper end
LED Power
LED Document
Error messages
GB - 117