User manual

Phoenix BIOS POST and startup messages
Message Possible cause Remedy
Diskette drive failure Diskette drive failure Change the drive
Diskette drive B: failure Drive B: defective or missing Change drive B:
Diskette drive A: failure Drive A: defective or missing Change drive A:
Diskette read failure
strike 7 to retry boot
Disk unformatted or defective Replace diskette and reboot
Display adapter failed; Primary adapter failure Change graphics adapter
Gate A20 failure Protected mode cannot be
enabled
Change CPU
Fixed disk configuration error The specified configura-
tion is not supported
Correct the hard disk
configuration
HD controller failure Controller failure Replace the hard disk
controller
Fixed disk failure
0
1
Defective hard disk 0 = C:
1=D:
Hard disk read failure -
strike 7 to retry boot
Defective hard disk Try to reboot. If not possible
change hard disk
Invalid config info ❍ Memory size not correct
❍ Display adapter not
correctly configured
❍ Incorrect number of
diskette drives
Start SETUP
Keyboard clock line failure
Keyboard data line failure
Keyboard or keyboard cable
connection defective
Check that keyboard and
cable are properly connected
Error messages
GB - 112