User manual

Installing a submodule
Appendix Installing a submodule
First remove the housing (see page 100 - 102) and the printer (see page
37, e.g. 55).
Then loosen the cable
of the cashier display
and remove the two
screws of the chassis
cover, pull the cover a
little forward and then
lift it up.
Please mind the cable!
Then remove the metal cover of the recess needed on the housing. Loo-
sen the two screws by using a 5mm socket wrench. Bring the socket of
the plug-in card through the SVGA/VGA/LAN/ASYN recess from the insi-
de (when installing a LAN/VGA/SVGA sandwich module, through the LAN
recess on the housing as well) and only then insert the card into the slot
provided in front of the battery. Attach the socket using the screws of the
cover.
Installing a submodule Appendix
GB - 104