User manual

Open the paper com-

partment of the printer,

tilt the cashier display

forward, and discon-

nect the ribbon cable

on the inside on the

left. To do this, open

theclampsbywhich

the cable is attached

to the housing, and re-

move the connector.

You can then remove

the housing.

The cable of the cashier display is still pluged in, so exerci-

se care when removing the housing.

Take off the metal cover

Undo the two screws indicated by arrows in the drawing below, and take

the metal cover off the housing. This gives you access to the expansion

slots.

DC24

KYBD

CASHDR COM4* COM3* COM2* COM1

LAN

AT-SLOT

COM7

COM8

VGA/LAN/ASYN

LPT1

Installing an expansion card Appendix

GB - 102