User guide

LEDs
left LED
constant green Connection with network
flashs green Data transfer
right LED
off 10 Mbit/s
green 100 Mbits
orange 1000 Mbit/s
Only connect shielded LAN cables (CAT5/CAT5e) as these offer a better
protection in case of interferences in a network.
DVI-I, DVI-D (op tio nal)
There is a DVI-I jack available to connect a high resolution TFT monitor.
Analog and digital video signals with a max. resolution of 2560×1600
pixels/60 hz. are transmitted via this inteface.
Optionally, your BEETLE can be equipped with a DVI-D connection for the
transmission of solely digital image data.
CRT (op tio nal via a DVI/VGA adap ter ca ble)
Via an adapter cable you can connect an analog monitor with your POS
system. It is plugged in the DVI-I jack.
PLINK Moni tor (TFT Mo ni tor, optional)
If a TFT adapter is installed you can connect a Panellink monitor to the
BEETLE /M-II plus. Connect the 40-pin data cable of the LCD to the system.
The signals for the touch screen function and the power supply is also made
via this cable. To implement the touch screen functionality for the COM1 or
COM2* interface you have to change some system settings in the BIOS
setup.
The COM4* interface is used internally for the Touch screen function and
thus is not available for the operation of other peripheral devices.
24 BEETLE /M-II plus