User guide

Brightness set dark
■ Adjust brightness by the brightness controll. For details consult the
manual provided with the monitor.
Power cable or Monitor cable not connected
■ Switch off the monitor of your system
■ Check power cable connections to system and to the grounded
protective-contact socket.
■ Check monitor cable to the system and to the monitor (if socket
present)
■ Switch on both the monitor and the system
Incorrect Time and Date
■ You can set time and date with the BIOS-Setup or with your operating
system. Refer to the manuals delivered with your system and for your
operating system.
If date and time remain being wrong after resetting your system
you should change the lithium battery. Please refer to the section
«Changing the battery» in this manual.
If these measures do not correct the problem, contact the Wincor Nixdorf
branch office responsible for your area.
What to do if... Appendix
GB - 82