User guide

Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct
the interference at his own expense.
Le présent appareil numérique ne fait pas de bruits radioélectriques
dépassant les limites applicable aus appareils numériques de la “Class
A” prescrites dans le Règlement sur le brouillage radioélectrique édicte
par le ministère des Communications du Canada.Note on the laser
lf your device is equipped with a CD ROM drive, the following condition
applies:
The CD ROM drive contains a light-emitting diode (LED), classified
according to IEC 825-1:1993:LASER CLASS 1; it must not be opened.Important notes
Important notes
The modular POS system BEETLE /M conforms to the current safety
standards for data processing equipment.
❚ If this device is taken from a cold environment into the operating
room, moisture condensation may form. The device must be
absolutely dry before being put into service; an acclimatization
period of at least two hours must therefore be observed.
❚ This device is equipped with a safety-tested power cable and may
be connected only to a prescribed grounded-contact power socket.
❚ When setting up the device, ensure that the power socket on the
device and the grounded-contact power socket are easily
accessible.
❚ To disconnect the device from the supply voltage completely,
switch off the device und disconnect the power plug.
❚ Ensure that no foreign objects (c.g. office clips) find their way into
the device, as this may lead to electric shocks or short-circuits.
❚ In order to ensure that the device is well ventilated and to prevent
overheating, do not obstruct the ventilation slots on your device.
Important notes
GB - 2