User guide

The next mask can be used to enter displays (OPERATOR for the cashier
display or VGA for the monitor).
At the end of SETUP you will see the following mask:
In this menu you can define whether the configuration data of your POS
system will be initialized when the system is started:
Yes With the start of the system the old configuration data will be reset.
The plug&play function will detect the current configuration data.
The installed components are initialized by these data. Components
not able for plug&play have to be registered manually.
No The installed components and drives will be initialized with the existing
configuration data. There will be no updating with the start of the
BEETLE.
Display OPERATOR
(5) Help
(8)Prev (6)Incr
(2)Next (4)Decr
Reset Config Data
No
(8)Prev (6)Incr
(4)Decr
BIOS setup
GB - 74