User guide

A further menu shows you, for example, the memory configuration:
XMS stands for extended memory specification (above a memory capacity
of 1 Mb).
It is possible to use the parallel interface LPT1 in standard mode and in
the modes ECP (Enhanced Capability Port) and EPP (Enhanced Parallel
Port). The transfer modes EP and EPP allow a higher data transfer rate
(up to 2MB/s and up to 2,4 MB/s). Please make sure that the peripheral
devices do support these modes.
The choice can be done in the following mask:
If you are using printers from WN, please choose the standard
mode.
Memory 640 KB
XMS 7168 KB
(8)Prev
(2)Next
LPT1 Mode
Standard
(8)Prev (6)Incr
(2)Next (4)Decr
BIOS setup
GB - 71