User guide

Following this, mount the POS housing again. The mains connector
can now be reconnected and the device switched on.
Expansion cards with electrostatically sensitive devices
(ESD) can be marked with this sticker.
When you handle boards fitted with ESDs (electronical components),
you must observe the following points under all circumstances:
■ You must always discharge yourself (e. g. by touching a grounded
object) before working with boards containing ESDs.
■ The equipment and tools you use must be free of static charges.
■ Pull out the power plug before inserting or pulling out boards con-
taining ESDs.
■ Always hold boards with ESDs by their edges.
■ Never touch pins or conductors on boards fitted with ESDs.
AT plug-in cards Configuration variants
GB - 54