User guide

Battery
Battery
The battery bridges any power failures and allows a controlled
shutdown of the POS programm by means of the appropriate software
(see “Security in the event of power failure”).
Battery charging time is approx. 8 hours after initial
startup. The battery is charged only while the system is
switched on.
The table below provides an overview of how long the BEETLE /M is
supplied with battery power in the event of a power failure (with the
battery fully charged).
Peripherals connected to the power output socket of the
POS terminal are not powered during a power failure.
Duration of
power supply Power output Operation
0, 5 minutes Full load with supply of external
(max. 90 W) peripherals (e.g. 24V printer)
1, 5 minutes Medium load e. g. printer running
(approx. 70 W)
10 minutes Low load (30 W) e. g. device switched on
Battery BEETLE /M - the components
GB - 42