User guide

Dynamic RAM
The operating system and the application require this memory while
they are running. The following types are available:
Pentium class CPU (with PS2 SIMM)
8 = 2*4 MB (Default) 16 = 2*8 MB
32 = 2*16 MB 64 = 2*32 MB
Connection options
The CPU is designed so that expansions are possible at any time, as
desired.
Connecting a hard disk
One hard disk can be connected to the CPU. It is used to store the
operating system and POS-specific software. It can also be used for
the long-term storage of the electronic journal. 3.5" hard disks can be
used for this purpose. These disks have a 16-bit IDE (integrated drive
electronics) AT-bus system interface and an integrated controller. For
the default settings and technical data for the hard disks, see the
configuration label.
Free slots
The system is fitted with two ISA or one ISA and one PCI slots for two
half-lenght AT-expansion cards.
Additional slot on the CPU
The CPU is equipped with an additional slot which can be used to
connect one of the available controllers (SVGA, LAN, SVGA/LAN,
ASYNC), if required.
CPU BEETLE /M - the components
GB - 40