User guide

About this manual
This manual describes the modular POS system BEETLE /M-II with a
Pentium- M/Celeron- M processor.
This documentation is intended to help you work with the POS system and
to serve as a reference work. The detailed table of contents help you find
the desired information quickly and easily.
The first section describes
n
everything you need to do before switching on the POS system and how
to connect peripherals to the BEETLE /M-II.
The second section contains
n
a brief overview of the components of your BEETLE POS system. Here,
you will also find a detailed description of recurring actions.
The Appendix
n
contains the most important technical data and a glossary.
Notes in the manual are marked by this symbol.
This symbol is used for warnings.
The type and scope of application programs depend on the customer’s own
selection; therefore, software will not be discussed further in this manual.
You will find a description of the BIOS Setup and the Central Processing
Unit in a separate manual (“POS Motherboard with Pentium- MCPU”), which
you can find under www.wincor-nixdorf.com.
Care of the BEETLE /M-II
Clean your BEETLE /M-II at regular intervals with a suitable plastic-surface
cleaner which can be ordered from Wincor Nixdorf International GmbH.
Make sure that the power plug is disconnected and that no liquid finds its
way into the device.
5
ABOUT THIS MANUAL